Add two intermediate deck support beams. Five fore/aft beams will be set into these bulkheads.
Corner bracing laminate
Rudder stock base.
Transom compartment is watertight, next is rudder stock followed with back cockpit bulkhead allowing inflatable buoyancy bag placement. The deck camber has been corrected to match the transom. I thought there was more tolerance to cover the 15 mm mismatch. The deck would have converged 15mm above the upper edge of transom profile. The upper bulkhead edges have been bolstered with left over mould stringers. Side deck watertight compartments, 4x, will start at the rear cockpit bulkhead.
No comments:
Post a Comment