The hull has been flipped with a little pain. Moving on with prepping surface for paint, drilling keel holes.
Log of the construction of a Flying Fifteen keelboat in Hilo, Hawaii
Sunday, May 8, 2016
As mentioned way back when the keel arrived from California a 1/2" twist in the keel profile with respect to the flange was discovered. I averaged the error between the flange and the center-line of the profile. The flange as well is flat whereas the keelson profile is not. That was missed in the casting plug. The holes were transferred from the keel to the hull and after the hull is finished the keel will be installed and the gap filled with epoxy.
The hull has been flipped with a little pain. Moving on with prepping surface for paint, drilling keel holes.
The hull has been flipped with a little pain. Moving on with prepping surface for paint, drilling keel holes.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment